USER MAINTENANCE
ALWAYS UNPLUG THE JUICER FROM THE OUTLET BEFORE
ASSEMBLING OR REMOVING PARTS AND BEFORE CLEANING.
This appliance requires little maintenance. It contains no user
serviceable parts. Do not try to repair it yourself. Any servicing
requiring disassembly must be preformed by a qualified appliance
repair technician.
CLEANING YOUR JUICER
THE JUICER SHOULD BE CLEANED AFTER EVERY USE...
Make sure that the Juicer is unplugged from the outlet; then follow the
DISASSEMBLY INSTRUCTIONS.
TO CLEAN THE MOTOR BASE:
•
Do not immerse the Motor Base in water or spray it with water.
Clean only by wiping with a damp sponge, cloth, or paper towel.
Using a sponge, wipe off the Motor Base, rubber feet and the
underside of the Juicer. Use a damp toothbrush or cloth to clean
juice from inside the Motor Base Hub (on top of the Motor Base).
• All Juicer parts (except the Motor Base) are washable in warm,
soapy water, using any liquid dishwashing detergent.
DO NOT USE ANY PRODUCTS CONTAINING AMMONIA OR
SCOURING POWDERS -- These products will dull, scratch or mar
the plastic surface.
TO CLEAN THE LID & JUICE BOWL:
•
Use the Cleaning Brush provided for scrubbing the Lid and Juice
Bowl. Do not use a metal brush or pad.
TO CLEAN THE FOOD PUSHER:
•
For proper cleaning, remove the circular cap in the cover of the
Food Pusher. To remove, grasp the cap and lift it directly out of the
Food Pusher using the notches on either side for leverage. Once
parts are dry, replace the cap.
INSTRUCTIONS
14