OPERATING INSTRUCTIONS
• Make sure that the Juicer is completely and properly assembled.
(See ASSEMBLY INSTRUCTIONS.) The Filter Basket should be securely
seated and the Pulp Basket at the rear of the Juicer, ready to catch pulp.
To reduce cleaning time, line the Pulp Basket with a plastic produce
bag (the kind you put your produce in at the grocery store).
• Place the Juice Pitcher underneath the Juice Spout.
• Plug the Juicer into a 120V AC electrical outlet.
TO TURN THE JUICER ON:
•
Slide the Control Switch to the desired speed setting ("1" or "2") and
begin juicing. The Juicer will not operate if the Lid-Locking Lever is
not properly engaged.
NOTE: You may alternate between speeds while juicing depending on
the appropriate settings for the various produce being juiced. (Refer to
Page 6 for suggested speed settings).
• Remove the Food Pusher from the Feed Tube.
• With the motor running, place produce into the Feed Tube.
• To re-insert the Food Pusher into the Feed Tube, the groove in the Food
Pusher must aligned with the rib in the Feed Tube. Use the Food Pusher
to gently direct food down the Feed Tube.
NOTE: To extract the maximum amount of juice, push the Food Pusher
down slowly.
Try alternating the types of produce being juiced to ensure
TO TURN THE JUICER OFF:
•
Slide the Control Switch to "0"(OFF). Be sure to unplug the Juicer from
the outlet when not in use.
~ Helpful Tip ~
~ Helpful Tip ~
maximum efficiency.
9