Table des Matières
Publicité
STEP FIVE: Secure Lid-Locking Lever
While pressing down on the Safety Lock Button,
swing the Lid-Locking Lever upward until the
safety-lock hook on the Feed Tube is engaged.
Once the Lid-Locking Lever is fastened into
place, release the Safety Lock Button.
IMPORTANT: The Juicer will not operate if
the Lid-Locking Lever is not properly secured.
STEP SIX: Position Pulp Basket
Slightly tilt the the Pulp Basket toward the
Juicer and place it directly beneath the Pulp
Ejection Opening. Push the bottom of the Pulp
Basket inward so the the top edge slides up,
behind the Pulp Spout. Continue to press firmly
on the bottom of the Pulp Basket until it fits
snugly against the the Motor Base. When
correctly positioned, the Pulp Basket will be
completely covered by the Lid.
STEP SEVEN: Juice Pitcher
Slide the Froth Separator into the Juice
Pitcher, then position the Pitcher beneath
the Juice Spout. Be sure that the Juice
Spout empties into the larger section
of the Pitcher.
Storing the Food Pusher
Store the Food Pusher in the Feed Tube until you are ready to
juice. To insert, rotate the Food Pusher until the groove in the
Food Pusher is properly aligned with the rib in the Feed Tube.
12
Publicité
Table des Matières
