Desktop Installation - GE 26936 Guide De L'utilisateur

D I
ESKTOP NSTALLATION
3
5
2
1. Make sure wall mount bracket is securely fastened.
2. Set RINGER switch (on both the handset and the base) to ON.
3. Plug the power supply cord into the POWER 12V DC jack on the base
and into an AC outlet.
4. Place handset in the base to charge for 12 hours. The CHARGE/IN USE
light (on the base) comes on to indicate that the battery is charging. If
you don't charge the handset battery properly (for 12 hours)
when you first set up the phone, performance of the battery
will be compromised.
5. Plug the telephone line cord into the TEL LINE jack on the base and into
a modular jack.
6. Raise the base antenna.
NOTE : The phone automatically defaults to touch-tone dialing. To change to
pulse (rotary) dialing, see "Tone/Pulse Dialing". If you don't know which type
of service you have, check with the phone company.
CAUTION: Use only the Thomson 5-2470 power supply that is compatible
with this unit. Using other power supplies may damage the unit.
6
6
2
4
NOTE: For desktop
charging only, the
handset is able to
1
charge facing up or
down.