Logitech UE ULTIMATE EARS 9000 Mode D'emploi page 3

POWER
UP.
Turn on the UE 9000
Wireless Headphones.
Turn on your Ultimate Ears 9000
Wireless Headphones
The Bluetooth® LED should blink blue rapidly,
indicating that the headphones are discoverable
SYNC
UP.
Pair your headphones with your Bluetooth-enabled device.
Apple iOS®
Go to Settings > General > Bluetooth
Turn on Bluetooth
Select "UE 9000" from "Devices "
PRESS
PLAY.
Press play on your media device
Optional: Pair additional Bluetooth-enabled devices.
You can pair your headphones with up to eight devices To do so:
1 Move the slider to the "Bluetooth" position and hold it there until the Bluetooth LED
blinks rapidly blue, indicating that the headphones are discoverable
2 Complete pairing according to the instructions on the previous page
3 Press play on the device you've just paired
When you've successfully paired a device, the Bluetooth LED will turn solid blue
If pairing times out (the LED will blink slowly), move the slider to the "Bluetooth"
position and hold it there until the LED starts rapidly blinking again