High Altitude Instructions; Before You Begin; Natural Gas Units Above 5,400 Ft. And Up To 10,200 Ft; Checklist - Thermador Pro Harmony PAALTKITGW Instructions D'installation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

High altitude instructions

Before you begin

9 CAUTION
Before proceeding with the conversion, shut off the
gas supply to the appliance prior to disconnecting the
electrical power.
Tools needed
T-20 torx driver
7/16'' box end wrench
13/16'' box end wrench
7 mm or a 9/32'' socket
1/4'' nut driver
16 mm hex bit or 5/8'' hex bit
Adjustable wrench
Soap and water mixture or leak-check solution
Parts included
Pro range natural gas high altitude kit for
cavity burners,
above 5,400 ft. and up to 10,200 ft.
Screwdriver, 1/8'' x 0.20''
Orifice, 2.06 mm (206), 36/48'' Harmony main
oven bake
Orifice, 1.85 mm (185), 48'' Grand aux oven
bake
Pro range LP gas high altitude kit for STAR
and cavity burners,
from 10,000 ft. to 10,200 ft.
Screwdriver, 1/8'' x 0.20''
Orifice, 1.26 mm (126), STAR burner
Orifice, 1.20 mm (120), Harmony/Grand, main
oven broil
Page. 6
Converting natural gas units
above 5,400 ft. and up to
10,200 ft.
Change only the following oven bake burners. All other
bake burners shall remain the same.
36'' and 48'' Pro Harmony
(PRGxxxWxH)
Main oven bake burner only
48'' Pro Grand
(PRGxxxWxG)
Auxiliary oven bake burner only 1.85 mm (185)

Checklist

Each of the following steps must be completed correctly
for the appliance to function properly. Check off each step
as it is finished.
Qty.
36'' and 48'' Pro Harmony models (PRGxxxWxH)
1
Ù
Step 1 Remove the oven door (page 11).
1
Ù
Step 2 Remove the kick and front panels (page 13).
Ù
Step 3 Change the main oven bake burner orifice to
1
the 2.06 mm (206) orifice (page 11 – page 13).
Ù
Step 4 Check the oven for gas leaks (page 14).
Ù
Step 5 Reassemble the door, kick and front panels.
Qty.
48'' Pro Grand models (PRGxxxWxG)
1
Ù
Step 1 Remove the oven door (page 11).
3
Ù
Step 2 Remove the kick and front panels (page 13).
1
Ù
Step 3 Change the auxiliary oven bake burner orifice
to the 1.85 mm (185) orifice (page 11 –
page 13).
Ù
Step 4 Check the oven for gas leaks (page 14).
Ù
Step 5 Reassemble the door, kick and front panels.
Orifice no.
2.06 mm (206)
Orifice no.

Publicité

Table des Matières
loading

Table des Matières