Changing The Bake Orifice, On Gas Ranges Only; Removing The Oven Door - Thermador Pro Harmony PAALTKITGW Instructions D'installation

Changing the broil burner orifice
1. Remove the broil orifice using a 7/16'' box end
wrench, while restraining the elbow fitting from
rotation using a small adjustable wrench.
IMPORTANT: DO NOT bend the broil burner orifice
bracket. Ensure that the broiler orifice is aligned to the
center of the burner tube inlet.
2. Replace the orifices as indicated in the table.
48'' Pro Harmony and 36'' Pro Grand
(PRL48xWxH and PRL36xWxG)
Main oven broil
• 48'' Pro Harmony
• 36'' Pro Grand
NOTE: The replacement broil orifices have straight
threads (not tapered threads) and DO NOT require thread
sealing compound.
3. Perform a gas leakage check of the orifice and
associated supply tube fittings, per the "Check for gas
leaks" section of these instructions.
Changing the bake orifice, on
GAS ranges only
Only necessary for converting natural gas
units above 5,400 ft. and up to 10,200 ft.
NOTE: Dual Fuel ranges have electric ovens and do not
have a bake orifice.
Change only the following oven bake orifices. All other
orifices shall remain the same.
36'' and 48'' Pro Harmony
Main oven bake burner only
Auxiliary oven bake burner only 1.85 mm (185)

Removing the oven door

Orifice no.
1.20 mm
9 CAUTION
(120)
•
•
•
•
(PRGxxxWxH)
48'' Pro Grand
(PRGxxxWxG)
USE CAUTION WHEN REMOVING THE DOOR.
THE DOOR IS VERY HEAVY.
The oven door is heavy and fragile. Use both
hands to remove or replace the door.
Failure to grasp the oven door firmly and properly
could result in personal injury and product
damage.
With the door off, never release the levers and try
to close the hinges. Without the weight of the
door, the powerful springs will snap the hinges
closed with great force.
Orifice no.
2.06 mm (206)
Orifice no.
Page. 11