Skil ME9821-00 Guide D'utilisation page 18

Press the Main Button again to return to the display of the two
distance measurements (Fig.7).
Fig. 7
1x
NOTE: When the laser beam is
Fig. 8
moved too quickly, the object is
out of range or bad laser beam
reflection is received during con-
tinuous measurement, all dashes
will display (Fig.8). In this case, it
means that the current measure-
ment is ineffective. In addition, the
area measurement is ineffective.
All dashes will display when you
press the Main Button twice
in quick succession to multiply the
last two measurements together.
The dashes will be hold and displayed in the bottom line of the
LCD screen for the current measurement but will not be saved
and displayed in the top line when you make the next continuous
measurement.
18