Skil ME9821-00 Guide D'utilisation page 14

CHANGE THE UNIT OF MEASURE
Press the Side Button
Main Button
feet/inch, only inches and meters (Fig.3). When the desired unit is
selected, the subsequent measurements will be displayed in the
selected unit even after the tool is restarted, until another unit is
selected.
NOTE: The unit of measure can be changed anytime, even for
already measured or calculated values.
Fig. 3
LASER MEASURING MODE
NOTE: Faulty or inaccurate measurements may result if tool is used
on problematic surfaces, such as:
Transparent surfaces (e.g., glass, water)
•
Reflective surfaces (e.g., polished metal, glass)
•
Porous surface (e.g., insulation materials)
•
Structured surfaces (e.g., roughcast, natural stone)
•
If required, use the laser target plate (not included) on these
surfaces.
Faulty or inaccurate measurements may also result if tool is used
to sight surfaces on an incline. Also, air temperature and indirect
reflections may affect measured value.
14
to turn the tool ON. Press and hold the
for approx. 1 second to scroll through the units of