Skil ME9821-00 Guide D'utilisation page 16

4. Press the Main Button
again to turn the laser ON and
continue measuring. The laser
beam symbol
the display. The continuously
updated/current measured
value is displayed in the bottom
line of the display, while the
previous measured value is
saved and displayed in the top
line.
5. Press the Main Button
measurement again. The laser is turned off, the previous
measuring value is still saved and displayed in the top line and
the current measuring value is held and displayed in the bottom
line (Fig.5).
NOTE: When the laser is turned ON and no button on the
measuring tool is pressed for approx. 5 minutes, the laser will turn
OFF automatically and continuous measurement stops. As a result
of the first continuous measurement, the current measured value will
be held and displayed in the bottom line of the LCD screen (Fig.4).
As a result of the following continuous measurements, expect that
the current measured value will be held and displayed in the bottom
line of the LCD screen, the previous measured value will be saved
and displayed in the top line (Fig.5).
16
flashes on
once more to stop the continuous
Fig. 5