Manual Settings - Baldor B0359WST2H2R Manuel D'utilisation

3. Daily RCC signal receiving: there are regular radio signal
receiving at UTC 7:00AM,8:00AM, 9:00AM, 10:00AM, 11:00AM
each day. It starts receiving signal at UTC 7:00AMeveryday. For
each day, once signal received at any one receiving time, it will
stop receiving signal that day.
4 Manual receiving: press and hold " ▼/RCC " button to enter
.
RCC signal receiving.
5 During receiving,you can press " ▼/RCC " button to exit RCC
.
receiving.
* RCC symbol display:
a. When receiving signal , RCC symbol "
b. When signal successfully received, LCD will display complete RCC
symbol " " and exit RCC receiving.
c. If no signal is received, the RCC symbol will disappear.

Manual Settings

After signal received, if there is no need for other settings, you
1.
can just finish reading here. If there is other setting require-
ments. Please check the following steps. Or if there is no signal
received, you can follow bellow steps for Manual Setting.
. 2
Press and hold " SET " button to enter into setting, press "
SET " button to skip setting steps or go to the next setting
option.
*Tips: press and hold "▲/ CH " or " ▼/RCC " button will quickly
change the value by 8 steps.
" will be flashing by"1HZ".
9