Baldor B0359WST2H2R Manuel D'utilisation page 18

Main Unit Placement
Place main unit in a dry area free of dirt and dust. To help ensure
an accurate indoor temperature measurement, be sure to place
the Main unit away from heat sources or vents.
Outdoor Sensor Placement
Sensor must be placed outside to observe outdoor conditions.
Sensor is water resistant for water splashes and is designed for
general outdoor use, however, to extend its life place the sensor in
an area protected from direct weather elements. The best location
is 4 to 8 feet (1.2 to 2.4 meters) above the ground with permanent
shade and plenty of fresh air to circulate around the sensor.
Important Placement Guidelines
• The distance between main unit and transmitter should be at least
5~6.5 feet (1.5~2 meters) away from any interfering sources such
as computer monitors or TV sets.
• To maximize wireless range, place units away from large metallic
items, thick walls, metal surfaces, or other objects that may limit
wireless communication.
• Please do not use other electrical products such as headphones
or speakers operating on the same signal frequency.
• Neighbors using electrical devices operating on the same signal
frequency can also cause interference.
• Do not clean any part of the product with benzene, thinner or
other solvent chemicals. When necessary, clean it with a soft
cloth.
• Never immerse the product in water. This can cause electrical
shock and damage the product.
PRECAUTIONS
18