Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
2.
Press and hold "ALERTS " button to enter temperature alerts
setting. The temperature alert value will be flashing.
Default setting : High Temperature Alert:95℉(35℃),Low Tem-
perature Alert: 41℉(5℃).
Alerts setting order: Outdoor High Temperature Alert→ Outdoor
3.
Low Temperature Alert→ Exit.
4.
Press "ALERTS" button to confirm and move to next alert
setting.Press "▲/ CH " or " ▼/RCC " button to adjust the value.
Hold to adjust quickly.
After turn on the alerts function, when the outdoor temperature
5.
is higher or lower than the upper and lower temperature alarm
setting value,the corresponding high temperature alert
symbol "
outdoor real-time temperature value will keep flashing ,Mean-
while with "BiBiBiBi" sound every 1 minute.
Press any button to stop the alert sound when alert rings.
6.
During setting, if no operation for 20 seconds, it will automatical-
7.
ly save and exit setting.
HUMIDITY
1.
After power on ,the indoor humidity will display automatically, it
will update reading each 30 seconds and start to receive
outdoor signal which lasts for max 3 minutes.
2.
Humidity display range: 1%-99%;for humidity lower than 1%,the
reading will be "1%" ;for humidity higher than 99%,the reading
will be "99%".
Accuracy: when the humidity is between 30-80%,the accuracy
3.
is ± 5%,if out of this range the accuracy will be ±7%.
" or low temperature alert symbol "
14
" with the
Publicité
Table des Matières
