Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
4.
Normally, the Max and Min record will update every 24 hours
at 0:00.
5.
If no operation for 5 seconds, it will automatically exit .
TEMPERATURE
1.
After power on ,the indoor temperature will display automatical-
ly, it will update reading each 30 seconds and start to receive
outdoor signal which lasts for max 3 minutes.
2.
Indoor temperature display range:14℉~ 122℉(-10℃~ 50.0℃);
for temperature lower than 14℉,the reading will be : "LL.L" ; for
temperature higher than 122℉,the reading will be : "HH.H".
3.
Outdoor temperature display range :-40℉~140℉(-40℃~60℃);
for temperature lower than -40℉,the reading will be : "LL.L" ; for
temperature higher than 140℉,the reading will be : "HH.H".
4 .
Arrow indication for temperature changes:
will display when temperature changes less than 1.8℉ within
one hour or compared with last reading;
will display when the reading increase by 1.8℉ within one
hour or compared with last reading.
will display when the reading decrease by 1.8℉ within one
hour or compared with last reading.
5 .
Accuracy: For temperature between 32℉~122℉,the accuracy is
±1.8℉,if out of this range the accuracy will be ±3.6℉ ; Tem-
perature resolution is 0.1℉(0.1℃).
Press "SET " button to select the temperature unit ℃/℉(Refer to
6 .
Manual Settings point 5).
OUTDOOR TEMPERATURE ALERTS
When in time display mode, press "ALERTS " button to turn on/off
1.
outdoor temperature alerts.Temperature alerts symbol
display on screen after alerts turned on.
13
will
Publicité
Table des Matières
