14
Vestfrostsolutions.com
Location and ventilation
EN
This unit must be installed according to the
below condition:
If the unit is installed in a location against the
below conditions, it's specified performance
may not be achieved or malfunction and acci-
dence may occur.
1. A location not exposed to direct sunlight
2. A location where the unit is not exposed
to rain
3. In a dry, well ventilated room
According to the described in Intended
use
4. Away from sources of heat
5. In a location with minimal variations in
temperature
Secure ventilation, above, below and around
the appliance. See illustrations.
(All dimensions are in millimeter (mm).
Note!
There need to be space for the door to open in
at least 90 degrees.
EN
Levelling the appliance
Vestfrost Solutions
15
Make sure the appliance is level. It can be
levelled by rotating the adjustable feet of the
appliance.
Be certain to lock the breaks for units
equipped with casters.
1.
Some models have ''anti slip base''for
the feet. Grab them from the plastic bag
and mount them
2.
Adjust the four feet until the unit is
level.