Publicité
Les langues disponibles
Les langues disponibles
STEP 11: When ready, position hands over the RH clip and press down vertically to engage the clips. You will hear a series of clicks. Then
proceed to the LH clip and make sure the T-bolt is still aligned with the clip. Press down to engage the clips. You will hear a series of click.
CAUTION: Failure to align the T-bolt to the white clip can cause the white clip to be damaged and pressed into the hole.
STEP 12: Open trunk lid and install the 4 (four) compression nuts. Loosely tighten all 4x nuts then torque using the following
sequence below.
Torque: 5.65 +/- 0.40 N•m (50 in-lbs +/- 3 in-lbs).
PART NUMBER:
E721SAN000XX
#2
1/4" Drive Ratchet
ISSUE
00
PART NUMBER: E721SAN000XX
1/4" Drive
Torque Wrench
6/24/19
#1
1/4" Drive
Deep Socket
SUBARU OF AMERICA
PAGE 8 / 9
Publicité
