Timer Function; Acoustic Signal; Manual Programmer; Child Safety Function - Franke FMXO 86 M Mode D'emploi Et Installation

Turn the knobs to the off position. Touch any of the symbols to interrupt the acoustic signal and act on the
symbols for a few seconds to annul programming.
AUTOMATIC FUNCTIONING (WITH DEFERRED FIRING START SETTING)
Act on the MODE symbol until DUR (duration) appears alternating with the current time, both flashing (the A
symbol also starts to flash). Act on the symbol to set the envisioned firing time duration. With MODE pass to
the END function, which flashes alternately with the firing end time calculated by the programmer on the basis
of the duration data inserted. Set the desired firing end time, by acting on the symbol. After a few seconds
the time re-appears and the letter A remains fixed. The kiln remains off and will re-activate automatically
(the symbol lights up), as set.
When the set time is reached, the acoustic signal indicates the end of firing, the letter A starts to flash and the
kiln switches off.
Turn the knobs to the off position. Touch any of the symbols to interrupt the acoustic signal and act on the
symbols for a few seconds to annul programming.
Example: it is 11:30, the firing time necessary is 30 minutes and firing must end at 13:00 by setting it in the
program. The kiln will switch on at 12:30 and switch off at 13:00.

TIMER FUNCTION

Act on the MODE symbol until the flashing
Set the desired time, using the
returns. When the set time is reached, the
Touch any of the symbols indifferently to stop the acoustic signal.
After a few seconds, the clock will re-appear. Press the MODE symbol to annul this function.
This function can be used for manual firing.

ACOUSTIC SIGNAL

The acoustic signal starts to ring for 6 minutes, to interrupt it, act indifferently on one of the three symbols.
The intensity of the signal can be regulated on three different sound levels in the following way: act
simultaneously on the symbols, act on the MODE symbol until ton appears, touch the
select the desired level.
DELETING THE PROGRAM
To delete a program set, act on the symbols to delete a program set, just act on the symbols simultaneously.
The programmer will return to the manual setting ready for new use.
SAFETY FOR CHILDREN OR AGAINST ACCIDENTAL CONTACTS
It is an additional function that allows to block access to the functionality of the electronic programmer keys
both when the kiln is running and as prevention with the kiln is off.
When activated, this function prevent children or other persons touching the programmer symbols
accidentally, thus modifying the previous program or from starting the kiln.
Every programmer signal that intervenes firing kiln functioning when the safety lock is activated can be
eliminated by acting on any of the keys. The safety lock will remain active.
The safety lock is activated automatically if, no symbol is pressed for about 8 seconds and is deactivated by
pressing the MODE symbol for more than 2 seconds or acting on the
NOTES: - The lock must be deactivated to display the remaining firing time.
MANUAL PROGRAMMER: PUSH-PULL for Model MAM 82 M
MANUAL OPERATION: Press the knob to raise it. Turn the knob anticlockwise to the "Hand" manual
symbol. See figure 10.
IMPORTANT: If the knob is left on Manual mode and a cooking programme is selected, the oven stays
on continuously.
COOKING PROGRAMME OPERATION: Turn the knob clockwise and select the required cooking time.
At the end of the cooking time the oven switches off automatically and a ringer sounds.
CHILD SAFETY FUNCTION (LOCK) – when provided for
This additional function is used to lock the electronic programmer buttons, when the oven is operating and as
a preventive measure when it is off. It is shown by the special symbol (key).
When activated, this function prevents children or others from modifying the previously set programme or
switching on the oven, if off, by pressing the programmer buttons.
symbol and 0:00 appears.
symbol. After a few seconds the
symbol starts to flash again and the acoustic signal starts.
21
symbol stops flashing and the clock
symbol to
symbols simultaneously.