TRENDnet TEW-654TR Guide D'installation Rapide page 14

Second, change the hardware switch on the bottom of the TEW-654TR to AP or
Client. Third, connect the provided Ethernet cable from the Ethernet port on your
computer to the Ethernet port on the TEW-654TR. Fourth, connect the power
adapter into the TEW-654TR and plug the power adapter into an available power
outlet. Fifth, open up your browser and enter http://654TR(AP Mode),
http://654TR-client (AP Client mode) or http://192.168.10.100 into the address bar.
Sixth, refer to the User Guide for additional instructions. The User Guide is on the
User Guide CD-ROM drive.
If you still encounter problems or have any questions regarding the TEW-654TR,
please contact TRENDnet's Technical Support Department.
2. Click Internet Protocol (TCP/IP) and
then click Properties. Then click on
Use the following IP address, and
make sure you assign your network
adapter an IP address in the subnet of
192.168.10.x.
12