Bushnell PRIME 1800 Mode D'emploi page 7

Lastly, you will have a choice of formats for the bullet drop/holdover data that will appear in the secondary numeric
display (14): IN (inches)*, ML (Mils), or MOA (moa). Briefly press the Mode switch to cycle through the three options,
pressing the Fire button to confirm and save the setting when your preferred bullet drop format is displayed. *Note: if
the unit of measure is set to Meters (M), the bullet drop is calculated and displayed in CM (centimeters) rather than
inches.
Rifle Mode Example
The line of sight is 376 yards, the angle is -33 degrees, and the bullet-drop/holdover is 28 inches. ARC takes into
account ballistic data based on your caliber and load from distances of 100-800 yards and compensates for any uphill
and downhill angles that also affect bullet-drop.
The Prime™ 1800 rangefinder's state-of-the-art digital technology allows the hunter or shooter to know precisely where
to hold for an effective shot. This information is a helpful guide or tool, and in no way should it ever replace practice and
familiarity with your rifle, cartridge, and load. We encourage practice shooting at different ranges, so you know how your
rifle, cartridge, and load will perform under various conditions. Always know what is behind your bullet; if you don't
know, don't take the shot.
• Reticle Select: The Setup menu allows you to select your preferred reticle type for the center of the display (for all
modes). Press and hold the Mode button to get into the Menu screen. Tap Mode while in Reticle Select and cycle
through Circle, Dot, and Circle with Dot (this is the default) options. Press the Fire button to confirm the selection of
the reticle you prefer, and exit the Setup menu.
• ACTIVESYNC™ Brightness Setting: ACTIVESYNC is always on, allowing the display to adjust the display contrast
to the background automatically. The Setup menu allows you to select your brightness preference (for all modes).
Press and hold the Mode button to get into the Menu screen. Tap Mode to while in ACTIVESYNC and cycle through
Brightness 25% (default setting), Brightness 50%, Brightness 75%, and Brightness 100% options. Press the Fire button
to confirm the selection of Brightness you prefer, and exit the Setup menu.
Line of Sight = 376 Yards
Degree of Angle = -33°
Holdover/Bulletdrop=28 Inches
-33 Angle / 28 inch Holdover
o
7