Usb Operation; Recording Operation - Sylvania SB3713-OP Mode D'emploi

USB OPERATION

1. Insert the USB device to the USB Player port on the unit.
Rear view of the unit
USB
USB
2. Power on the unit and enter the mode as previously explained..
3. Press the Standby/Source button on the unit or press SOURCE button on the remote control
repeatedly until the color of Indicator turns to WHITE.
During the playback, you can press the
4.
(or press and hold the Vol- or Vol+/REC. button on the unit) to play the next or the
previous recorded track. Press the
button on the unit to pause or play again.
NOTE:
The recorded tracks will be played first, then the music stored in the USB device.
•

RECORDING OPERATION

This unit has Recording function. Please insert a USB device first when using this function.
1. Power on the unit and enter the mode as previously explained.
2. Press the Standby/Source button on the unit or press SOURCE button on the remote control
repeatedly to switch to desired mode.
3. When in playback, press and hold the Vol+/REC button on the unit or the Vol+ button on the
remote control until you hear a prompt tone, which indicates the recording process starts.
4. To stop recording, press and hold the Vol+/REC button on the unit or the Vol+ button on the
remote again. When hearing two beep tones, release the button.
NOTE:
The recorded tracks will be stored in USB device automatically.
•
To play the record tracks, press the Standby/Source button on the unit or press SOURCE
•
button on the remote control repeatedly to switch to USB mode. It will start to play
automatically.
During the playback, you can press the
•
play the next or the previous recorded track, or the
The recording function only works in BT, AUX and Line in mode.
•
button or the button on the remote control
button on the remote control or the FM Scan
button or the button on the remote control to
button to pause or play again.
16