Blue - Sylvania SB3713-OP Mode D'emploi

BLUETOOTH PAIRING AND CONNECTION
For first time use or re-pairing, pair the unit to an external Bluetooth (BT) device
as follows:
1. Power on the unit and enter the play mode as previously explained.
Press the Standby/Source button on the unit or press the SOURCE button on
2.
the Remote Control repeatedly until the color of the Indicator turns to Blue.
3. Power on the external BT Device and select Bluetooth to enter into search
mode. When SYLVANIA SB3713 appears from your devices list, click it to start
pairing. After paired, the Blue Indicator will stop blinking.
If the passcode doesn't appear, see the instructions of the external BT device.
4.If you want to connect another BT device while playing, press "PAIR" Button on
remote control to disconnect this pairing, then connect another BT device
following above steps.
NOTE:
When the external BT Device searches the unit, The code
1.
"SYLVANIA SB3713" will appear on the display of the external BT device.
2. If the BT device asks for a password, input pairing code "0000" to confirm it to
connect to "SYLVANIA SB3713".
Normal operation after paired:
1. Power on the unit and select the playback source to BT as previously
explained.
2. Turn on the BT function of the external BT Device.
3. Touch SYLVANIA SB3713 and wait a few seconds until the unit pairs to the
external BT device automatically. The Blue indicator will stop blinking.
4. Play the music in the connected BT Device as usual.
5. During playback:
~ Press the
/TUNE + or
~ Press the button or the FM Scan button on the unit on the remote control
to pause.
Press again to resume normal playback.
/TUNE - button to skip the tracks.
12