Table Des Matières; General Operation - Sylvania SB3713-OP Mode D'emploi

GENERAL OPERATION

1. Connect the AC/DC adapter to the unit and wall outlet. The indicator will light up
in red, which indicates the unit is powered on and enters the standby mode.
2. Press the Standby/Source button on the unit or the
enter the play mode.
3. Press the Standby/Source button on the unit or the SOURCE button on the remote
control repeatedly to switch to desired mode. The color of the indicator will turn to:
Green.........................................................................FM Radio
Blue............................................................................Bluetooth
Orange (green + red)......................................................AUX 1
Indigo (green + blue).............................................OPTICAL IN
Violet (blue + red)............................................................AUX 2
White (green + blue + red).................................................USB
4. During Playback:
~ Press the VOL (Volume) + or - buttons on the unit or Remote Control to adjust
volume level as desired.
~ Press the EQ button on the Remote Control repeatedly to select your desired
EQ mode from MUSIC, TALK, MOVIE and STANDARD. Press and hold this
button to return the default EQ mode (MUSIC).
~ Press the (Mute) button on the Remote Control to turn off the sound. Press
again to resume.
~ Press the BASS +/- buttons on the Remote Control to adjust the sound
level of bass.
~ Press the TREBLE +/- buttons on the Remote Control to adjust the sound
level of treble.
When the (Mute) button is pressed, the indicator will turn to white and blink
rapidly to imply that the unit has received the specified command and answer it
with the corresponding action. Press it again; the unit will turn back to normal
state. When any of the other buttons on the unit/remote control mentioned here
is pressed, the indicator on the unit will blink once and the unit will answer the
command with the corresponding action.
5. When finished listening, press and hold the Standby/Source button on the unit or
press the button on the Remote Control to power OFF the unit and put in
standby mode.
button on remote control to
10