Klarstein 10029984 Mode D'emploi page 23

Changing the lights method 1
Note: Before changing the lights, make sure that the appliance is plugged off.
Protect against danger when changing lights, such as wearing gloves.
Changing the lights
• Remove the grease filter.
• Use a tool or the hand to press the spring splinter of both sides of LED light to the inside, until the light is
pressed out, see pic 1.Then slightly pull the light connecting wire out, and dismantle the terminal of the
light connecting wire. See pic 2.
• Apply the reverse procedure to install the light back.
Pic 1
Pic 2
23