Klarstein 10029984 Mode D'emploi page 19

6
Install the lower chimney bracket with 2 wall plugs and 2
screws ST4*30mm.
Put the upper chimney into the lower chimney , pull up
7
the upper chimney and reach the height your require.
Settle the upper chimney bracket with 2 wall plugs and 2
screws ST4*30mm.
Install the upper chimney with upper chimney bracket
8
with 2 screws ST4*8mm
Installation (Vent outside)
If you do not have an outlet to the outside, exhaust pipe is not
required and the installation is similar to the one show in section
"Installation (Vent outside)".
19