VALBERG FIH 60 EGK 756C Consignes D'utilisation page 15

B
Put the chimney on the cooker hood. Fix the lower chimney bracket on the wall by 2 screws(4mm
x30mm).
Then pulling out the upper chimney upwards to the target height. Adjust to reach the height required.
Fix the upper chimney on the upper chimney bracket by 2 screws (4x8mm). Then fix the upper
chimney bracket on the wall. Before fixing the bracket on the wall, you can decide the upper
chimney bracket fixing holes for installation.
Using the appliance
Upper decorative chimney (Inner)
Lower Chimney bracket
Lower decorative chimney (Outer)
8 EN