Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN
CLEANING FUNCTION
Unplug your appliance from outlet. Fill the water tank with water up to 12
(MAX) level and place the teapot into its slot. Then, plug in your appliance.
• Press the "CLEAN" button on the control panel. The cleaning process
will start when the green light just above the button lights up.
• At this stage, your appliance will boil the water and pour it into the
teapot slowly.
This process will take approximately 30 minutes.
• Do not unplug your appliance and remove the teapot from its slot
without making sure that the related lights on your appliance are off and
the process is complete.
• After "CLEAN" mode has finished, you can continue to use your
appliance according to the instruction manual.
USE OF YOUR APPLIANCE
FIRST USE
Before using your device for the first time, run it
with only water for 3 times without adding any
coffee.
OPERATING
1. Open the water reservoir and the
filter lid and fill the water reservoir
with fresh and clean water up to
the level depending on how many
cups of coffee you wish to make.
* Do not exceed the maximum
water level indicated on the
reservoir.
2. Add ground filter coffee into the
filter and use one scale of coffee for each cup
(e.g. to make 10 cups of coffee, use 10 scales; 1
scale=6/7 gr).
3. Close the lid.
4. Place the glass jug on the heating surface.
5. Plug in your device.
6. Choose the aroma setting. (see the title
AROMA SETTING)
ARZUM
17
Publicité
Table des Matières
