Using Your Stroller With The Litemax Or Safemax Infant Car Seat - Evenflo sibby Instructions

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

USING YOUR STROLLER WITH THE LITEMAX or SAFEMAX INFANT CAR SEAT

• Only use the Evenflo LiteMax or SafeMax infant car seats with this stroller.
Other infant car seats or carriers are not designed to fit the stroller frame and if used with this stroller may result in
serious injury to your child .
• Before using the LiteMax or SafeMax infant car seat with this stroller, read all the instructions provided with it and keep
the instructions stored properly for future use .
• DO NOT lift stroller by using the LiteMax or SafeMax infant car seat handle when installed on stroller .
• If unable to securely attach LiteMax or SafeMax infant car seats to this stroller, remove the car seat and contact
Evenflo ParentLink at 1-800-233-5921 (USA), 1-937-773-3971 (Canada), or 01-800-706-12-00 (Mexico).
• To avoid serious injury, make sure the LiteMax or SafeMax infant car seat is securely snapped onto the car seat mounts .
• Some LiteMax or SafeMax infant car seats have a blanket/boot option that must be removed for proper attachment to
this stroller .
1. Fully recline the stroller seat back and unfasten the seat adjustment buckle (page 5).
2. Make sure the bumper bar is securely latched (page 4).
3. The LiteMax or SafeMax infant car seat
Position infant car seat over the stroller. Touch rear vertical surface
of bumper bar. Lower the infant car seat into the stroller and push down on handle. Infant car seat will click when fully
locked into place.
4. Pull up on the front and back of the LiteMax or SafeMax infant car seat to test that it is properly locked into place.
CHECKLIST FOR PROPER INSTALLATION
• Make sure the LiteMax or SafeMax infant car seat
position (facing the parent).
• Make sure the LiteMax or SafeMax infant car seat is securely locked into the
car seat mounts
D
• Pull up on the front and back of the LiteMax or SafeMax infant car seat to
test that it is properly locked into place.
10
MUST be facing the parent when installed.
A
A
CLICK!
and resting on the bumper bar
WARNING
of infant car seat against rear vertical surface
B
C
is in the rear-facing
A
.
C
C
CLICK!

Publicité

Table des Matières
loading

Table des Matières