Moca Settings - Triax TECW 211 Mode D'emploi

8.

MoCA Settings

After changing the parameters, click "Apply" button to apply the changes.
Item Item
Item Item
Network Search
Last Operating
Frequency
Beacon Power
Level
Preferred NC
EN
This device can scan the existing MoCA network within the MoCA
predefined channels. By default the channel D1 (1150MHz) will be used.
Please change all devices operating frequency to enable the
communication between them.
This is the last operating band of the device.
Select the beacon power value. By default do not change it.
If checked, this device will try to be MoCA Network Coordinator.
If not checked, the NC will be determined by the MoCA network.
Description Description Description Description
30
User manual