Wifi 5Ghz Basic - Triax TECW 211 Mode D'emploi

7.1 WIFI 5GHz Basic

Configure the WLAN basic settings for the device.
Item Item
Item Item
Disable Wi-Fi
Interface
Network Name
Channel Width
Control
Sideband
Channel Number
Radio Power (%)
Show Wi-Fi
Clients
When "Show Wi-Fi Clients" button is clicked, the Wi-Fi -associated clients table is pop-up like below
EN
Check the box to disable 5GHz WLAN.
Input name for this Wi-Fi network. This name also called SSID will be
scanned by the Wi-Fi station/client device.
Select the channel width. 80MHz is recommended for the high data rate.
This device will automatically choose the sideband for 40MHz or 80MHz
bandwidth.
Select the channel number for the WLAN. If "Auto" is selected, the device
will scan the channels and select the unused channel. This is the preferred
setting.
Select the smaller percentage to drop the radio power to reduce the
WLAN coverage. The default value is 100%.
Click this button to open the active WLAN client table. All associated
WLAN clients will be displayed in the table.
Description Description
Description Description
18
User manual