Basic Operation; Uninstalling The Software; Technical Data - Philips PicoPix PPX2055 Guide D'utilisation

2 Basic Operation

Installing the Software
1 Close all open programs and applications before
beginning the installation process.
2 Connect the device with a USB cable to your com-
puter.
3 Select PicoPix 2055 as drive in the Windows
Explorer and start the program Picopix Fun Viewer
Setup_Windows.exe or Picopix Fun Viewer
Setup_MAC.hqx according to the OS being used.
4 Your computer will now prepare for the installation
process. Follow the instructions of the installation
wizard and restart the computer.
Note
Disconnect the Device from the
Computer
Disconnect the device from the computer
before restarting. The computer may try
to boot from the Pocket Projector, which
was recognized as a USB storage device.
Set up the Device
1 Connect the device to your computer on two USB
ports by means of the Y-USB cable in order to
ensure the full performance of the device.
2 Start the program Picopix Fun Viewer. A symbol
appears in the statusbar. The Pocket Projector is
switched on and projects the image from the com-
puter. A window opens where you can choose
between mirrored or advanced projection as well as
setting the brightness.
Note
Screen Resolution of the Computer
The best picture quality can be reached, if
the screen resolution of the computer is
set to 800¦×¦600¦pixel.
Note
Brightness of Projector
At first installation the devices starts with
minimum level of brightness.
3 Adjust the focus using the focus wheel.
4 Disconnect the USB cable from the computer when
you finish the presentation to save energy and exit
Picopix Fun Viewer.
Note
Exit the Program Picopix Fun Viewer
Click on the button Exit in the software or
do the following:
1) Click on the Picopix Fun Viewer sym-
bol in the Windows task bar using the right
mouse key.
2) Click on Exit.

Uninstalling the Software

1 Close all open programs and applications before
beginning the uninstall process.
2 If you use Windows OS: Load the uninstall pro-
gram by clicking on Picopix Fun Viewer > Uninstall
Picopix Fun Viewer in the start menu.
3 If you use MAC OS: Load the uninstall program by
clicking on Application > Utilities > PicoPix
viewer.uninstall.
4 Follow the instructions on the screen.
5 At the conclusion of the uninstall process you must
restart your computer.
6 After rebooting has occurred, removal of Picopix
Fun Viewer from your computer will be complete.

Technical Data

Technology / Optical
Display technology.................................. WVGA 0,3" DLP
Light source............................................................RGB LED
Resolution......................................... 854¦×¦480 pixel (16:9)
Supported Resolutions ....................SVGA/XGA/WXGA
Brightness (Bright Mode) ......................... up to 55 lumen
Contrast ratio............................................................. 1000:1
Projected image size........................................12¦–120 inch
Screen distance.................................................20¦–120 inch
Horizontal Scan Rate ........................................ 31¦–¦69¦kHz
Vertical Scan Rate ................................................ 56¦–¦85¦Hz
Power Supply ....................................................via USB plug
Dimensions (L¦×¦H¦×¦W)............... 2.83¦×¦1.06¦×¦2.83 inch
Weight..........................................................................4.08¦oz
Recommended Ambient........................................5¦–¦35¦ºC
Relative Humidity.................. 15¦–¦80¦% (non-condensing)
Minimum PC Requirements
Processor......................Intel Pentium M or AMD Athlon
Clock rate......................................................................2GHz
Operating System .......Windows XP Professional (SP2), 
.................................... Vista, Windows 7, Mac OS 10.6
RAM ....................................................... 1GB DDR SDRAM
Free Hard Drive Space ..............................................40 MB
USB Port .................................................................... USB 2.0
All data are provided for reference purposes only.
Sagemcom Documents SAS reserves the right to
make any changes without prior notice.
EN
3