First Time Installation; Manual Search - Grandin LGT32V510 Mode D'emploi

Masquer les pouces

Les langues disponibles

Media Subtitle: In order to display subtitles properly

while viewing a media  le via Media Browser use this

setting to select a movie subtitle language.

By pressing " " or " " button, select the desired

language option (optional).

Installation

The Installation menu is mainly intended to help you

for creating a Channel Table in most ef cient way.

Select Installation from the main menu by pressing "

" or " " buttons.

Automatic Channel Scan

Automatic channel scan is started by pressing

OK button while Automatic channel scan item is

highlighted.

The following message appears on the screen:

Highlight Yes or No by using " " or " " buttons and

press OK button to con rm.

If Yes is selected, automatic search starts.

Selecting No cancels automatic search.

After search is completed for digital channels, a

message asking whether to search for analogue

channels appears on the screen:

Highlight Yes and press OK button to search for

analogue channels. The following menu appears on

the screen for analogue channel search:

02_[GB]_MB36_HDIDTV-MPEG4_BRONZE8_32855W_3900UK_10068346_50166694.indd 56

Set Language item by pressing " " or " " button.

Press " " or " " button to highlight Country item and

then use " " or " " to set. Press " " or " " button to

highlight TXT Language. Select a region by using " "

or " " button. When  nished, press OK or RED button

to continue. To cancel, press the BLUE button.

After APS is  nalized, the programme table will appear

on the screen. In the programme table you will see

the programme numbers and names assigned to the

programmes.

Manual Search

In Manual Search, the number of the multiplex is entered

manually and only that multiplex is searched for the

channels. For every valid channel number, signal level

and signal quality are shown on the screen.

In both manual and auto search any existing channel

in the database is not re-stored to avoid redundant

duplicates of that channel.

Clear Service List (*)

(*) This setting is visible only when the Country option is set

to Denmark, Sweden, Norway or Finland.

Use this setting to clear channels stored. Press "

" or " " button to select Clear Service List and then

press OK. The following OSD will be displayed on

the screen:

Press OK to cancel.

Select Yes by pressing " " or " " button and press

OK to delete all of the channels.