Explanations Of Symbols - koban KMT-01 Mode D'emploi

KMT-01
VOLTAGE AND CONTINUITY TESTER
Voltage Tester Description
1.Handle test probe –
2.Instrument test probe +
3.measurement point illumination
4.LEDs for voltage display
5.LED for single-pole phase test
6.LED for " ! " warning voltage
mode display
7.LED for + DC voltage mode display
8.LED for – DC voltage mode display
9.LED for continuity
10.Self-test switch(Autotest)
11.Measurement point lighting Button
12.Battery case
13. LED for +DC voltage mode display
14. LED for -DC voltage mode display
("13" LED add "14"LED for AC voltage mode display)

Explanations of Symbols

The voltage tester shows the following symbols:
48 www.grupotemper.com