Klarstein ESPRESSIONATA GUSTO Mode D'emploi page 29

CAUTION: Do not leave the appliance unattended during use, as it requires
manual operation.
WARNING: To avoid burns, do not touch the metal parts of the appliance
with bare hands during operation. The metal parts of the appliance are hot
during operation. Always grip the metal parts by the handle, knob or lever.
1 Press the button to turn off the appliance.
2 Remove the water tank from the appliance.
3 Fill it with water. The water level must not exceed the MAX mark.
4 Carefully reinsert the tank into the appliance.
5 Make sure that the steam knob is at position 0 and the button
accidental scalding.
6 Press the button to turn on the appliance.
7 Press the button . The appliance pumps water from the tank through the fi lter.
8 As soon as water comes out of the coffee outlet, press the button
9 The appliance will now start to heat the water.
10 The WATER indicator lights up when the water is hot enough to make an espresso.
1 1 Place an empty espresso cup on the drip grid.
12 Press the button again and wait a moment until the espresso is dispensed.
NOTE: While making an espresso or using the frother, the WATER and
STEAM indicators will temporarily turn off to indicate that the appliance is
heating to maintain the temperature.
is off to prevent
again to stop.
EN
29