Remington REVEAL BB1000 Mode D'emploi page 9

ENGLISH
C CLEANING AND MAINTENANCE
•
To ensure long lasting performance of your Body Brush, clean regularly.
•
Ensure the Body Brush is switched off before cleaning.
•
DO NOT attempt to clean any part of this product in a dishwasher.
•
Do not submerge the brush handle in water.
•
Body Polisher: after each use, detach the brush head, rinse under water and
allow to dry on a flat surface with the bristles facing upwards.
•
Brush Handle: To clean the handle, wipe with a damp cloth.
, CAUTION: Ensure all parts are dry before connecting the charger into a wall
socket.
, REPLACING THE BRUSH HEADS
•
For best results, we recommend replacing the brush heads approximately
every 3 months.
•
Replacement Brush Heads are available:
•
Body Polisher: SP-BB1
•
Natural: SP-BB2
•
Contact your nearest Remington service centre for more information.
REMOVING BATTERIES
•
The battery must be removed from the appliance before it is scrapped.
•
The appliance must be disconnected from the supply mains when removing
the battery.
•
Run the Body Brush until the motor stops.
•
Remove brush head
•
Remove the 4 screw caps from the bottom of the body brush handle and
expose the screws.
•
Use a screwdriver to remove the 4 screws.
•
Take out the bottom housing and expose the printed circuit diagram board
and battery assembly.
•
Take the battery out and cut the connection strap from the printed circuit
diagram board.
•
The battery is to be disposed of safely.
9