Opale-Paramodels Mike L Manuel D'utilisation page 30

Mount the other bearing on the additional GFK part.
The shoulder should this time, be inside towards the
body of the pilot.
Use a CHC M4-18 screw and an M4 locknut to make
the elbow joint.
Tighten enough to limit the play, while leaving a free
rotation of friction.
The additional GFK part must be fastened with a CHC
M3-16 screw, M3 spacer and a M3 locknut.
Secure the rod at the elbow using a CHC M3-12 screw
and locknut.
Remove the CHC M3-8 screw previously used. Then
install the rod using a CHC M3-12 screw
O pa l e - Paramo del s. co m
Opale Aero System SARL - 23 rue de la Motte
62250 MARQUISE - France
30
contact@opale-paramodels.com +33(0)981 144 387