Opale-Paramodels Mike L Manuel D'utilisation page 26

Assemble the two lower flanks using the basin junc-
tion plate.
Secure the assembly using 4x CHC M3-8 Screws and
Brake Nuts.
This operation can be performed with or without the
accelerator servomotors.
Assemble the pilot's pelvis with the upper part, using
4x CHC M3-16 screws, 4x M3 spacers and 4x brake
nuts.
Installation of the servomotors for the use of the
rescue parachute (optional)
If you have purchased the Mike L pilot with the
harness equipped with a reserve parachute, it will
be necessary when mounting your pilot, to install
in the leg a standard size 40x20x40mm servomotor,
minimum torque of 10kg .cm.
Attach the one using 4x CHC M3-8 screws and lock-
nuts as shown.
O pa l e - Paramo del s. co m
Opale Aero System SARL - 23 rue de la Motte
62250 MARQUISE - France
26
contact@opale-paramodels.com +33(0)981 144 387