Midea MLH52N4AW W Manuel Du Propriétaire Et Instructions D'installation page 18

PRE SOAK
EXTRA
RINSE and
PRE SOAK
MY CYCLE
18
For soaking your
garments prior to the
wash cycle.This option
begins with a brief tumble
and then proceeds to
soak the clothes with
water and detergent for a
specified period of time.
Once complete, the cycle
will begin automatically.
Pre Soak must be selected
prior to pressing
You can lock the controls
to prevent any selections
from being made. Or you
can lock or unlock the
controls after you have
started a cycle.
Children cannot
accidentally start the
washer by touching
buttons with this option
selected.
To save a favorite cycle,
set the desired setting
for wash cycle, soil level,
spin speed and wash temp
settings and hold down
the My Cycle button for
3 seconds, A beep will
sound to indicate the
cycle has been saved.
To use your custom cycle,
press the My Cycle button
before washing a load.
To change the saved cycle,
set the desired setting and
hold down the My Cycle
button for 3 seconds.
The Pre Soak time will add
an additional 10-20 minutes
to the overall wash time.
High-efficiency detergent
from the main wash
compartment in the
dispenser is used for the
Pre Soak period and main
wash cycle.
button.
To lock the washer, press
and hold the Extra Rinse
and Pre Soak buttons for
3 seconds.
To unlock the washer
controls, press and hold
Extra Rinse and Pre Soak
buttons for 3 seconds.
NOTE: The Power button
can still be used when the
machine is locked.
NOTE: When using My
Cycle, wash options cannot
be modified after the cycle
has been started.
NOTE: If you change wash
options with My Cycle
before starting the cycle,
the My Cycle light will
turn off and you will be
returned to the base cycle.