R&G RSET017BK Instructions De Montage page 3

Page | 3
PICTURE 1
GEAR SHIFT SIDE

Undo and remove the gear shift lever clamp bolt and remove the gear shift lever (mark
position of the split line on gearbox shaft to aid reassembly) as arrowed in picture 1.

Remove the two footrest mounting bolts arrowed in picture 2.

Remove the original rear-set assembly.

Fit the new gear shift lever to the gear box shaft as shown in picture 3.

Fit the main bracket using the two bolts as shown in picture 4.
Unit 1, Shelley's Lane, East Worldham, Alton, Hampshire, GU34 3AQ
Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301
TOOLS REQUIRED

10, 11, 12, 13 AND 14mm OPEN ENDED SPANNERS.

SET OF METRIC ALLEN KEYS UP TO 8mm A/F.

TORQUE WRENCH UP TO 20Nm.

ELECTRICAL PLIERS/CRIMPS
TORQUE SETTINGS
M4 BOLT = 8Nm
M5 BOLT = 12Nm
M6 BOLT = 15Nm
M8 BOLT = 20Nm
PICTURE 3
R&G Racing
PICTURE 2
PICTURE 4
www.rg-racing.com Email: info@rg-racing.com