Publicité
Les langues disponibles
Les langues disponibles
6. Remove hinges from door
Using a #2 Phillips screwdriver, remove the remaining 4 screws
from the hinges. Then remove hinges A and B and set the screws
and hinges aside.
7. Transfer magnet latch
Using a #2 Phillips screwdriver, remove the magnet latch and
install it on the other side of the door.
IMPORTANT: Because the magnetic force is strong, it is important
to maintain a firm grip and to slide the magnet with a steady,
gradual movement. Doing so can keep the magnet from
reattaching to the metal surface and breaking, or from possibly
pinching your fingers.
A.
Remove housing.
Holding it tightly, slide magnet over.
B.
Holding it tightly, lift magnet off of shim.
Remove shim.
C.
After removing the magnet latch, move it to the opposite side of the
door by reversing the previous steps.
D.
Make sure arrow on front of shim points up.
Rear of shim is embossed to ensure correct seating in opening.
E.
Screw on shim.
Holding magnet tightly, place edge of magnet on shim and lower
magnet so edge rests flatly on shim.
F.
Holding magnet tightly, slide into place.
Screw on housing.
2
Publicité
