Uline H-5487 Mode D'emploi page 4

7. Attach mount assembly to flat screen.
NOTE: Spacers should be used between
mounting bars and flat screen to avoid
damage. (See Figure 8)
Figure 8
FOR 200mm x 200mm
MOUNTING PATTERNS:
If using a 200mm x 200mm mounting pattern, attach
mounting plate directly to flat screen using mounting
bolts, washers and spacers. (See Figure 9)
Figure 9
Bottom
FOR ALL OTHER MOUNTING PATTERNS:
For all larger mounting patterns, attach long horizontal
mounting bars to mounting plate using four bar bolts.
(See Figure 10)
NOTE: To correctly position horizontal mounting
bars, make sure oval mounting holes are on the
bottom and the lips face the mounting plate.
Figure 10
Top
Bottom
PAGE 4 OF 15
ASSEMBLY CONTINUED
Top
Space short vertical mounting bars along the long
horizontal mounting bars to match mounting pattern
width. Fasten with four bar bolts. (See Figure 11)
NOTE: To correctly position vertical mounting
bars make sure oval mounting holes are
centered at the width of your mounting pattern
and the lips face the mounting plate.
Figure 11
Attach vertical mounting bars to flat screen using
mounting bolts, washers and spacers. (See Figure 12)
Figure 12
NOTE: Before continuing to step 8, make sure
casters are in the locked position. (See Figure 13)
Figure 13
Lip
Lip
0521 IH-5487