Device Overview - Blumfeldt Stonehenge XL Mode D'emploi

EN
16

DEVICE OVERVIEW

LED light
(1) Take out all parts of the packaging. Please keep in mind that some water
may splash over the rim of a bowl, do not set up the cascade fountain on a
surface which may be damaged by water.
(2) Open the door behind the fountain.
(3) Fill the fountain with clean tap water.
(4) Connect the pump to the tube and place the pump underwater and make
sure that, it is fully immersed in water..
(5) Connect the pump cable to the socket of the control housing on the rear
side of the solar panel.
(6) Connect the LED light cable to the socket of the control housing.
(7) Close the door behind the fountain. Make sure direct sunlight shines on
the solar module.
(8) The solar fountain is now ready for use.
Door
To LED
Pump
light