INVENTOR AT-IONUV-20L Manuel D'utilisateur page 19

Step 4: Plug in the dehumidifier to
a power supply and turn it on. Press
the Mode button
3 seconds until the pairing indication
appears on the display.
Press Confirm to proceed.
EN
on the device for
Troubleshooting:
If the pairing process is not successful:
Verify that the router is broadcasting at 2.4GHz.
l
If the router has dual band broadcasting, verify that the
l
network names (SSIDs) are different. For additional help, contact
your router/internet provider.
Verify that the Wi-Fi password is WPA2-PSK encrypted, and the
l
authorization type is set to AES.
Position the dehumidifier as close as possible to the router
l
during the pairing process.
Power off the router, the dehumidifier, and the device (tablet
l
or mobile) and allow 5 minutes.
Restart the pairing process from Step 2.
l
If the pairing is not successful, repeat the process with a
l
different smart device (tablet or mobile).
Contact Inventor's After Sales Dept.
l
Step 5: Select the Wi-Fi Network and enter
the password. Press Confirm to proceed.
The pairing process may take some time.
Note:
The pairing indication on the display of the
dehumidifier may disappear during this
step.
19