osann Neo360 SL Mode D'emploi page 22

EN
INSTALLATION OF THE CHILD CAR SEAT
1) Group 0+/1 (rear-facing)
(For children from 0 to 18 kg)
1. Press the two lateral Isofix connector buttons in order to extend the length of the Isofix
connectors.
2. Fold out the support leg.
3. Guide the Isofix connectors to the Isofix connector pieces on the seat of the vehicle and
ensure that they lock in position.
4. Slide the child car seat until it rests securely against the backrest of the car seat. Please
ensure that both Isofix indicators are showing green.
5. Press the button to adjust the height of the support leg and ensure that this is fully in contact
with the footwell of your vehicle.
6. Please ensure that the indicator on the support leg is showing green.
7. Set the child car seat to the maximum reclining position and turn it until it is in rear-facing
seat position 4.
8. When placing your child in the child car seat, turn the car seat towards the car door for
convenience.
9. Loosen the belt buckle on the child car seat and place the belts on the outer side of the seat.
10. Put your child in the child car seat.
11. Adjust the height of the head support so that the shoulder belt remains free.
12. Close the belt buckle again until you hear a click.
13. Pull the front adjustment tab in order to tighten the belts. Please ensure that the straps are
not twisted.
14. Turn the seat into the rear-facing position. Check whether the child car seat is locked in
this position.
- 22 -