osann Neo360 SL Mode D'emploi page 18

EN
USING THE CHILD CAR SEAT
Adjusting the tilt angle of the car
seat
• With one hand, use the lever on the lower front
side of the seat bucket to adjust the tilt.
• Hold the back of the seat bucket back with your
other hand and adjust the tilt.
• If the child car seat is used in a rear-facing position,
please always have it set to the maximum reclining
position. (Position 4)
• In a front-facing position (body weight from 9 kg
and more), you can select any of the three tilt an-
gles (position 1 + 2 + 3) offered by the child car seat.
Turning the car seat
• Use one hand to pull the lever at the front of the
seat and use your other hand to turn the seat
bucket. The lever can be released when turning
the seat bucket.
• The seat offers four locking positions: at 90, 180,
270 and 0 out of 360 degrees to the base. The seat
bucket makes an audible click when it is moved
into one of these positions.
• Positions 1 + 2 + 3 are only suitable for use in the
direction of travel. Position 4 is exclusively for use
facing away from the direction of travel. Position 4
is achieved automatically when the child car seat
is placed in position 1 and then rotated by 180 de-
grees.
Only forward-facing
- 18 -
4, 3 2 1
Only rear-facing
0/360°
270° 90°
180°