babymoov Transat IN & OUT Notice D'utilisation page 6

Thank you for choosing the Babymoov IN & OUT Bouncer.
EN
For your baby's safety, please read this instruction manual carefully and keep
it in a safe place so that you can refer to it at a later date.
DIAGRAM SHOWING THE POSITIONING OF THE PUSH-BUTTONS
This bouncer is activated by push-buttons
which enable it to be converted into a
booster seat and a baby changing bag. To
incline the IN & OUT Bouncer or to change
to a different function, each push-button
must be activated at the same time as the
button on the opposite side.
1 - Before using the product in its bouncer function, you should first of all attach the four bars which form the hammock
function. You can now secure the hammock by clipping it to the bouncer support.
2 - To use your bouncer, open it by simultaneously pressing the two buttons (no.2 on the diagram) to lower the seat.
To incline the back of the bouncer seat, you must first lower the « changing bag » part of the back by pushing the
two buttons at once (no.3 on the diagram). The seat and the « changing bag » part of the seat-back should both be
horizontal.
3 - Then press the two buttons simultaneously (no.1 on the diagram) which allows you to release the seat-back and incline
it to the required position. You can choose from three inclined positions.
4 - In the bouncer function, you can use the « stable » function or the « hammock » function. To activate or stop the swinging
movement, simply turn the wheels of the hammock around.
Please note: for the sake of your child's safety, please ensure that the four feet of the hammock are fully turned around.
5 - A five-point safety harness is provided so you can attach your child safely in the rocker. The two side clips should
be fitted together in the central part. The IN & OUT rocker has three different positions on the back rest and two different
lengths on the seat. This allows you to fix the five points of the harness to suit the size of your child (at the shoulders,
between the legs, height of back/seat).
To undo the harness, simply press on the pushbutton to unlock it.
6 - To use the IN & OUT Bouncer as a booster seat, you must remove the hammock by simultaneously pressing the two
buttons which secure the hammock support to the bouncer.
7 - Then open your booster seat by simultaneously pressing the two buttons (no.2 on the diagram) to lower the seat.
The seat-back should be in vertical position and so should the « changing bag » part of the seat-back.
8 - Then secure the booster to the seat and the seat-back by means of the two straps provided for this purpose. Please
adjust these two straps to suit the height of your chair. For your child's comfort, please use the cushion provided.
Finally, install your child in the same way as with the Bouncer function by means of the three-point safety harness.
6
All manuals and user guides at all-guides.com
BOUNCER FUNCTION
BOOSTER SEAT FUNCTION
IN & OUT BOUNCER • Instruction manual
Seat
2
« Changing
bag » part of
the back
Back
1
3