Festo MH1- Serie Instructions D'utilisation page 15

English
1 User instructions
The miniature valves type MH1...-PCB are intended ex-
clusively for controlling pneumatic actuators. If additional
conventional accessory components such as actuators are
connected, the specified limits for pressures, temperat-
ures, electrical data, torques, etc. must be complied with.
Observe the regulations of the trade associations, German
Technical Control Board (TÜV), VDE stipulations or corres-
ponding national regulations.
Miniature valve terminals may only be installed by trained
personnel.
Warning
• Before carrying out installation and/or maintenance
work, switch off the power supply for the valve solen-
oid coils and the compressed air supply.
Note
Commission only a miniature valve terminal which has
been mounted and wired completely.
Festo MH1...-PCB-Z6 1205b English 15