Additional Information - D-Link DWC-2000 Guide D'installation

Masquer les pouces Voir aussi pour DWC-2000:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 44
Figure 14. Configure AP
Valid Access Point Summary: Enter the
MAC address of the AP you want to manage.
Figure 15. Enter MAC addresses
3. Save Settings and Connect - When the
WLAN Connection Setup Wizard has been
completed, click the Connect button to save
your settings and connect your APs.
Figure 16. Summary
6

Additional Information

You can refer to the additional documentation
on the accompanying master CD or you
can
visit
http://support.dlink.com
for more support on how to configure
your DWC-2000.
D-Link Wireless Controller User Manual
This
manual
operation and control of the wireless
controller
firmware
controls the wireless controller hardware.
It includes examples of how to carry out
typical administrative tasks such as setting
up Rogue AP detection and how to use the
wireless controller in various scenarios.
D-Link Wireless Controller CLI Reference
Guide
This document describes all available text-
based commands that can be used on an
RJ-45 to DB-9 Console or SSH interface to
configure the wireless controller.
Online Support
If there are any issues which are not in the user
manual, please visit http://support.dlink.com,
which will direct you to your appropriate local
D-Link support website.
Warranty Information
The
D-Link
Limited
information is available at http://warranty.dlink.
com/
online
describes
the
general
which
drives
Lifetime
Warranty
and

Publicité

Table des Matières
loading

Table des Matières