De Dietrich DHC 106 E1 Guide D'utilisation page 12

Part 1 - INSTALLATION INSTRUCTIONS
1 - Fixing with screws
Using the cardboard template,
mark and drill the holes on the
wall (2 holes Ø 8 mm see
instructions on the template),
insert the plugs in the holes,
tighten both 4,2 x 44,4 screws
(supplied) leaving about 5 mm
unscrewed, hook the hood onto
the screws (fig. 1) and secure
tightly from inside (fig. 2). Mount
the safety square (supplied) above
the hood (fig. 3).
2 - Fixing with brackets
Using the cardboard template,
mark and drill the holes on the wall
(4 holes Ø 8 mm see instructions
on the template), fix the metal
brackets with screws and plugs
(supplied), hook the hood onto the
brackets (fig. 4). Fix the hood with two knobs (supplied) (fig. 5). Make sure the hood
is level and, if necessary, adjust by acting upon the adjustment screws (fig. 6).
3 - Respect warning 2.5.
401_05a
12
3
3
5
5
1
1
2
2
4
4
6
6