Routine Maintenance - Uline SANITAIRE H-3480 Mode D'emploi

DAILY
1. Replacement Bag – Before each use, inspect
replacement bag and dispose of if 2/3 or more full.
Check cloth bag for any debris and clean out if
necessary.
2. Belt Condition – Check the belt for signs of wear.
Change the belt when it is loose or has cuts or
cracks. Refer to the diagram on the underside of the
base for proper installation of belt and brush roll.
3. Supply Cord and Plug – Check supply cord and
plug for any cuts or damage. If damaged, have
the supply cord and plug assembly replaced by a
qualified Sanitaire repair center.
4. Motor – If there are unusual sounds or if poor
performance occurs, the motor should be inspected
immediately by a qualified Sanitaire repair center.
PAGE 6 OF 21

ROUTINE MAINTENANCE

WEEKLY
1. Cloth Dust Bag – Inspect the dust bag assembly for
2. Brushroll Bristle Strips – Check the bristles for wear.
3. Brush Roll Condition – Check and remove any loose
MONTHLY
1. Cleaning – Inspect and clean the vacuum,
2. Electrical – Inspect the cord assembly for wear and
3. Handle – Check the handle assembly for tightness
4. Motor – A qualified Sanitaire repair center should
any unusual wear. Replace bent clips, stretched
springs or a worn bag with genuine Sanitaire
replacement parts.
The bristle strips should be replaced when the
bristles are less than 1/4 inch in length.
material, such as string or hair wrapped around the
brush roll.
including the fan chamber and under the hood.
check for proper handle assembly.
and replace handle bolts if missing.
make a routine check of the motor every 6 months.
Inspect the motor immediately if there are any
unusual sounds or if poor performance occurs.
0422 IH-3480