Thank you for purchasing this waterproof CA 10002 pH/
T° probe tester.
For best results from your instrument:
„ read these operating instructions carefully,
„ comply with the precautions for use.
Information or useful tip.
The CE marking indicates conformity with
European directives, in particular LVD and EMC.
The rubbish bin with a line through it indicates
that, in the European Union, the product must
undergo selective disposal in compliance with
Directive WEEE 2012/19/EU. This equipment
must not be treated as household waste.
PRECAUTIONS FOR USE
„ The operator and/or the responsible authority must carefully
read and clearly understand the various precautions to be
taken in use.
„ Observe the conditions of use, namely the temperature
and humidity.
„ Do not use the instrument if it seems to be damaged,
incomplete, or poorly closed.
„ All troubleshooting and metrological checks must be done
by competent accredited personnel.
„ If the electrode is dry, soak it for at least 30 minutes in a
storage solution before using it.
1. First use......................................................................12
2. Presentation ...............................................................12
3. Use ..............................................................................14
5. Maintenance ...............................................................17
6. Warranty .....................................................................19
ENGLISH
CONTENTS
11